diff --git a/Measuring-and-Estimating-Shear-Force-of-one-Stapled-And-One-row-Multi-Stapled-Wood-Joints.md b/Measuring-and-Estimating-Shear-Force-of-one-Stapled-And-One-row-Multi-Stapled-Wood-Joints.md
new file mode 100644
index 0000000..ed65d6b
--- /dev/null
+++ b/Measuring-and-Estimating-Shear-Force-of-one-Stapled-And-One-row-Multi-Stapled-Wood-Joints.md
@@ -0,0 +1,9 @@
+<br>Solid wooden had been utilized in furniture body for centuries regardless paying consideration on engineering design. However, it is quickly turning into severe subject for using wood material in value-effective way without waste. Especially, the engineering knowledge regarding the lateral resistance of stapled joints is having extra significance for designing and reengineering the merchandise of furniture manufacturers to satisfy product strength and sturdiness (Demirel et al. Several fasteners have been used in furniture upholstery. Staple is one of the those fasteners (Demirel 2012), and  [brushless motor shears](http://hd18.cn/bbs/viewthread.php?tid=129230&extra=) it is pushed into wooden members to assemble them with an air gun. Therefore, it's quick and easy to use as a fastener in upholstered furniture body manufacturing (Zhang and Maupin 2004 , Demirel et al. The resistance of an upholstered furnishings body predominantly is determined by the fastenings that hold its structural members collectively (Demirel et al. 2018). Therefore, the fastener holding capacity, equivalent to lateral shear resistances, of a fabric needs to be known (Demirel 2012), especially for the solid wood materials.<br>
+
+<br>In Figure 1, the entrance rail linked to entrance stump with staple at an angle of 45º degree in a sofa body constructed from pine. Some authors, Zhang et al. Erdil et al. (2003), Zhang and Maupin (2004), Zhang et al. 2006) have been performed the studies on lateral and direct withdrawal load resistances of staples-only related joints in plywood and Yadama et al. 2002), Erdil et al. 2003), Zhang et al. 2006), Demirel and Zhang (2014), Demirel et al. 2013) performed the research on lateral and direct withdrawal load resistances of OSB joints connected with solely staple. Dai et al. (2008) studied tensile strength of glued-only joints made of pine plywood and  [brushless motor shears](https://lovewiki.faith/wiki/User:SergioGrishin42) OSB supplies. However, there's lack of research on lateral and direct withdrawal load resistances of staples linked joints constructed from strong wood corresponding to Scotch pine, beech (broadly used in furniture business), alder (turning into well-liked in furniture making trade).<br>
+
+<br>An example of the front rail and stump joint connected with staple. Demirel et al. 2013 investigated the shear of single stapled and one-row multi stapled joints manufactured from three OSBs. The general densities of OSB-sort-I, OSB-type-II, and OSB-type-III had been 460 kg/m3, 470 kg/m3 and  buy [Wood Ranger Power Shears price](http://zerodh.co.kr/bbs/board.php?bo_table=free&wr_id=309503) Ranger [cordless power shears](https://humanlove.stream/wiki/User:Meagan56H79540) Shears 560 kg/m3, respectively. Outputs of the research showed that the shear pressure of OSB-type-I joints was significantly lower than the ones of OSB-sort-II and OSB-type-III joints. Increasing variety of staples from two to four with one increment considerably increased the shear pressure of the joints. Derived two alternative prediction equations offered a chance to estimate the shear power of OSB joints. The widespread view of a stapled furnishings joint pattern in this research is proven in Figure 2. One primary member and  [brushless motor shears](http://39.108.87.45:3050/abigaillanning/wood-ranger-power-shears-shop2002/wiki/How-to-buy-the-most-Effective-Kitchen-Shears) one side member have been the 2 normal members consisting of each pattern. The overall view of one-row multi-staple [Wood Ranger Power Shears manual](https://www.guerzhoy.a2hosted.com/index.php/Top_3_Cordless_Pruning_Shears_Of_2025._Tested_By_Gardeners) joint. These two members were stapled at an angle of 45º to be linked more successfully.<br>
+
+<br>The main member had been constructed from three different [Wood Ranger Power Shears website](https://git.ricecakecat.com/apriltgv96581/9270297/wiki/Felco-2-Pruners-Classic-F2) species, Scotch pine, alder, beech and aspect members had been constructed from 18 mm-thick 9-ply furniture grade scotch pine plywood constructed in the laboratories of Karadeniz Technical University. SENCO staples with a crown width of 11,1 mm and leg size of 38,1 mm were used. 1,6 mm is the leg width and 1,four mm is the thickness of staple which was lined with Sencote coating as a way to not have rust. An entire one-factor experiment with 30 replications for each mixture was carried out to check the factor effect on the resisting capacity of the joints in opposition to lateral shear hundreds. The issue was major members (Scotch pine-alder-beech) and  [brushless motor shears](https://45.76.249.136/index.php?title=How_Do_You_Prune_Potentilla_Shrubs) therefore, totally ninety samples have been loaded, and the results had been recorded. Two-issue experiment with 10 replications for every mixture was carried out to verify the numbers of staple impact on the shear resistance of one row stapled wooden joints.<br>
+
+<br>The elements had been wooden specie of most important member (Scotch pine, alder, and beech) and the variety of staples (2, 3, and  [brushless motor shears](http://hi-couplering.com/bbs/board.php?bo_table=free&wr_id=5110008) 4). Therefore, the numbers of joint examined on this half have been 90. The staple placement patterns based on the numbers of staple used are illustrated in Figure 3. All specimens were subjected a loading course of parallel to staple alignment path. The staple placement pattern of three joint specimens connected with (a) two, (b) three, and (c) 4 one-row staples. Moisture content material (MC) and density of wooden supplies have been determined based on the standard of ASTM D 4442 (2010) and ASTM D 2395 (2010), respectively. Before joint preparation, all [Wood Ranger Power Shears price](http://wiki.konyvtar.veresegyhaz.hu/index.php?title=Szerkeszt%C5%91:RefugiaHorvath) species and facet members have been rested in the chamber controlled at 20 ºC ± 5 ºC temperature and  [brushless motor shears](https://test.onelondon.online/index.php?title=Workers_Use_Various_Types_Of_Snips) 65 % ± 5 % relative humidity. The staples were inserted into the joint members with a pneumatic staple gun at an air strain of 483 KPa. All exams were carried out within the laboratory at 23 ºC ± 2 º C and 50 % ± 5 % relative humidity.<br>
\ No newline at end of file